Most production processes require incoming inspection of raw materials to assure quality.  A similar step occurs at the outlet where most product streams must be tested for quality assurance.  Most processes uses water and/or air as a carrier for mass or energy and must themselves be qualified at  the source and at each effluent point.  At the process center is a reactor or mixer where reagents are converted to the final product within a range of compositions and physical properties that must be monitored and, often, controlled.

Request Brochure      

Supported Operations

• Micro-Solid Phase Extraction
• Preconcentration by Dynamic Focusing
• On-Line Capillary Liquid Chromatrography
• MicroTrap MS Confirmation (available 2004)

Supported Studies

• Incoming Inspection
• Process Optimization
• Product Release Testing
• Effluent Compliance Monitoring

Protasis is leading the way toward putting liquid chromatography and mass spectrometry on-line for:

• Active ingredients

• Impurities

• Reaction byproducts

• Degradation products

• Diastereomers or racemization

The FDA has sounded the alarm.  Pharmaceutical, beverage and drinking water companies must begin testing their production lots on-line and improve their quality assurance procedures each step of the way. 

Protasis analyzers are 'aware' of their underlying procoess and can take control action when necessary. 

Protasis will:

1. Optimize liquid separations method in Protasis laboratories for target molecules, sample matrix and process setting.

2. Encapsulate your worked-out method into a plug and play separations cartridge for repeatable, reliable monitoring.

3. Integrate the analytics into your process system.